Myricom Myrinet/PCI-X Network Interface Cards Průvodce řešením problémů Strana 4

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 44
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 3
"Guide to Switches and Switch Networks”
http://www.myri.com/myrinet/m3switch/guide/
For Myrinet-2000 M3-CLOS-ENCL-* or M3-SPINE-ENCL-* switches, please read:
http://www.myri.com/myrinet/14U_switches/
http://www.myri.com/scs/14U_switches/
and the following section of the Myrinet FAQ (http://www.myri.com/cgi-
bin/fom?file=369.
For Myrinet-2000 PCIX-based NICs, we recommend reading:
“Guide to Myrinet PCI-X Network Interface Cards”
http://www.myri.com/scs/doc/guide_to_pcix_nics.pdf
For Myrinet-2000 PCI64-based NICs, we recommend reading:
“Guide to Myrinet/PCI Host Interfaces”
http://www.myri.com/scs/doc/guide_to_interfaces.pdf
After reading these guides, you should be aware of the following important information
and precautions pertaining to Myrinet PCI-X and PCI NICs:
Myrinet-2000 PCI-X NICs support both PCI-X and PCI protocols, and can be used
in any 3.3V PCI slot.
Myrinet-2000 PCI NICs function correctly in hosts with 32-bit or 64-bit PCI slots,
with either a 33MHz or 66MHz PCI clock, and with either 3.3V or 5V signaling.
Myrinet-2000 PCI NICs function correctly in PCI-X slots, except for the PCI-X
slots in some AMD64, EM64T, and PowerPC64 motherboards. Contact
[email protected] for further details.
If at all possible, avoid the use of riser cards with Myrinet PCI or PCI-X NICs.
We recommend that the Myrinet-2000 PCI (or PCI-X) NIC is installed into the PCI
(or PCI-X) slot closest to the PCI chipset.
After reading the "Guide to Switches and Switch Networks", you should be aware of the
following important information and precautions pertaining to Myrinet-2000 M3-E*
switches:
© 2007 Myricom, Inc. DRAFT
4
Zobrazit stránku 3
1 2 3 4 5 6 7 8 9 ... 43 44

Komentáře k této Příručce

Žádné komentáře